Zte ZXHN H1600 - Configure the SNTP

5 Configure the Internet
3. Click Apply button to apply the changes.
5.7 Configure the SNTP
The section describes how to configure SNTP. SNTP provides the parameters of SNTP
configuration features.
Steps
1. On the main page of the ZXHN H1600, select Internet > SNTP to the SNTP page,
see Figure 5-31.
Figure 5-31 SNTP Configuration Page
2. Configure the SNTP parameters.
Table 5-21 lists the SNTP parameters.
Table 5-21 Parameter Descriptions for the SNTP
Parameter Description
Time Zone Time zone.
NTP Server1-NTP Server5
IP address of the primary/secondary/third/fourth/fifth NTP
server.
Poll Interval Interval of time synchronization.Unit: second.
Automatically Adjust Clock For Day-
light
Enable or disable the automatically adjust clock for daylight
function.
SJ-20200218145027-006 | 2021-03-04(R1.0) 5-35