Zte ZXHN H1600 - Configure the SIP Accounts; Configure the Advanced Parameters

ZXHN H1600 Maintenance Management Guide
7.2 Configure the SIP Accounts
This procedure describes how to configure basic parameters of the VoIP service, includ-
ing sip account, authorization username, password.
Steps
1. On the main page of the ZXHN H1600 device, select VoIP > Basic to open the SIP
Accounts page, see Figure 7-2.
Figure 7-2 SIP Accounts Page
2. Set the parameters. Table 7-1 describes the SIP account parameters .
Table 7-1 Description of the SIP Account Parameters
Parameter Description
SIP Account Registered name of a SIP subscriber. Normally, it is the phone number
of the subscriber.
Authorization User-
name
Username for authentication by the SS system, which must be the same
as that configured in the SS system.
Password Password for VoIP service authentication by the SS system, which must
be the same as that configured in the SS system.
3. Click Apply button to apply the changes.
7.3 Configure the Advanced Parameters
This procedure describes how to configure advanced parameters of the VoIP service, in-
cluding echo cancellation, jitter buffer, and DTMF.
Steps
Configure the Advanced Parameters.
1. On the main page of the ZXHN H1600 device, select VoIP > Advanced. The Ad-
vanced page is displayed, see Figure 7-3.
7-2 SJ-20200218145027-006 | 2021-03-04(R1.0)