EasyManua.ls Logo

Zte ZXHN H1600 - Page 31

Zte ZXHN H1600
109 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5 Configure the Internet
Parameter Description
DNS1-DNS3 IPv6 address of the DNS server for static connections. You can
set up to three IPv6 addresses for the server. These IPv6 ad-
dresses are provided by the ISP.
Router Solicitation Make sure the IP address is sole.
VLAN
Specifies whether to carry a VLAN tag in the packets sent over
the WAN connection. By default, On button is not selected. If it
is selected, a VLAN tag is carried in the packets sent over the
WAN connection, and the VLAN ID must be set.
VLAN ID
Identifies a VLAN. Range: 0-4094. To ensure normal service op-
eration, the VLAN ID must be the same as that set in upper-lay-
er MDU/DSLAM configuration.
Note
In the ZXHN H1600 provisioning, configure only one Internet-WAN connection and
delete other WAN connections.
2. Click Apply button to apply the changes.
Configure the DSL Modulation Parameters
3. On the main page of the ZXHN H1600, select Internet > WAN > DSL to the DSL
Modulation Parameters page, see Figure 5-8.
SJ-20200218145027-006 | 2021-03-04(R1.0) 5-9

Table of Contents

Other manuals for Zte ZXHN H1600

Related product manuals