Zte ZXR10 - Authentication-Group Deadtime; Authentication-Group Ip Mng

Chapter12RADIUSConguration
Related
Commands
showconfigradiusall
authentication-group
deadtime
PurposeUsethiscommandtosetthetimewhentheRADIUSseverisin-
valid.
CommandModesRADIUSauthenticationsevergroupconguration
Syntaxdeadtime<time>
Syntax
Description
<time>
Whenauthenticationinformationistransmit
totheRADIUSsever ,ifthereisnonormal
response,BRASregardsthisRADIUSserver
tobeinvalidduringthisperiodafterthe
retransmitofauthenticationinformation
severaltimes.Andthisperiodissetbythis
command.Afterthisinvalidtime,ifnecessary,
BRAStriestoreusethisauthenticationsever
(unit:minute,range:0~3600default:5
minutes).
IfthereisonlyoneRADIUSserverin
theRADIUSgroup,itisrecommendedto
congurethisvalueto0.Ifthereareseveral
RADIUSserversintheRADIUSgroup,itis
recommendedtousethedefaultvalue.
ExampleThisexampledescribeshowtocongurethetimewhentheRA-
DIUSseverisinvalidto3minutes.
ZXR10(config)#radiusaccounting-group1
ZXR10(config-authgrp-1)#deadtime3
ZXR10(config-authgrp-1)#
Related
Commands
showconfigradiusall
authentication-groupipmng
PurposeUsethiscommandtomaketheRADIUSauthenticationserver
groupusethemanagementportforauthentication.
CommandModesRADIUSauthenticationsevergroupconguration
Syntaxipmng
noipmng
Instructions�Ifitisrequiredtousethemanagementportforauthentication,
thiscommandmustbecongured.
�Themanagementportisnotusedbydefault.
ExampleThisexampleshowshowtomaketheRADIUSauthentication
servergroupusethemanagementportforauthentication.
CondentialandProprietaryInformationofZTECORPORATION135