Zte ZXR10 - Units and Networking Modes

ZXR10CommandManual(SecurityVolume)
deny(StandardFormat)
PurposeUsethiscommandtocongurethe“deny”conditionsforastan-
dardIPaccesslist.Deletethe“deny”conditionwithnoformof
thiscommand.
CommandModesBasicACLconguration
Syntaxdeny<source>[<source-wildcard>][time-range<timerange-na
me>][log]
nodeny<source>[<source-wildcard>][time-range<timerange
-name>][log]
Syntax
Description
<source>
Sourcenetworkorhostofthesentpacket,an
IPaddressindotteddecimalformat
<source-wildcard>
Wildcard,usedforsource,aanIPaddress
indotteddecimalformat;andthekeyword
“any”isusedastheabbreviationofthe
source0.0.0.0andthesourcewildcard
255.255.255.255
time-range
<timerange-name>
Nameoftimerange,thelengthisnotmore
than31characters
logIndicatestheIPpacketmeetingtheruleis
conguredwiththelogfunction(Appliedto
ZXR10GARandZXR10ZSRonly)
ExampleThisexampledescribeshowtodenytheaccesstothehostonthe
speciednetwork.
ZXR10(config)#aclstandardnumber1
ZXR10(config-std-acl)#deny192.5.34.00.0.0.255
ZXR10(config-std-acl)#deny193.5.35.00.0.0.255log
Related
Commands
permit
deny(ExtendedFormat)
PurposeUsethiscommandtocongurethe“deny”conditionsforanex-
tendedIPaccesslist.Deletethe“deny”conditionwiththeno
formofthiscommand.
CommandModesExtendedACLconguration
Syntaxdeny<protocol><source><source-wildcard>[<source-port>]<d
estination><destination-wildcard>[<destination-port>][time-ra
nge<timerange-name>][log]
nodeny<protocol><source><source-wildcard>[<source-port
>]<destination><destination-wildcard>[<destination-port>][ti
me-range<timerange-name>][log]
14CondentialandProprietaryInformationofZTECORPORATION