Zte ZXR10 - Command Line Configuration; CLI Overview and Modes

Chapter2ACLConguration
Syntax
Description
number<acl-numb
er>
StandardACLnumber ,range:2000~2499
name<acl-name>StandardACLname,notmorethan31
characters
alias<acl-alias>ACLalias,notmorethan31characters
ExampleThisexampledescribeshowtoenterIpv6StandardACLcongu-
rationmode.
ZXR10(config)#ipv6aclstandardnumber2000
ZXR10(config-std-v6acl)#exit
ZXR10(config)#ipv6aclstandardnameacl2000
ZXR10(config-std-v6acl)#
Related
Commands
showipv6acl
move
PurposeUsethiscommandtomoveanACLruletothefrontorbackof
anotherrule.
CommandModesBasicACLconguration,extendedACLconguration,Layer2ACL
congurationandhybridACLconguration
Syntaxmove<rule-no>{after|before}<rule-no>
Syntax
Description
<rule-no>ACLrulenumber ,range:1~100
InstructionsTherulesusedinthecommandmusthavebeenalreadycong-
ured.
ExampleThisexampledescribeshowtomoverule1tothebackofrule10
oftheACL.
ZXR10(config)#aclextendednumber100
ZXR10(config-ext-acl)#move1after10
Related
Commands
showacl
name
PurposeUsethiscommandtocongureanaliasforanACL.Usetheno
formofthiscommandtoremovethealias.
CommandModesBasicACLcongurationmode,extendedACLcongurationmode,
Layer2ACLcongurationmode,hybridACLcongurationmode,
IPv6ACLstandardmodeandIPv6ACLextendedmode
Syntaxname<acl-name>
Syntax
Description
<acl-name>
AliasoftheACL,notmorethan31characters
CondentialandProprietaryInformationofZTECORPORATION21