Zte ZXR10 - Aaa Keepalive; Aaa Multiple-Hosts

Chapter13AAAConguration
Related
Commands
showaaa
aaakeepalive
PurposeUsethiscommandtocongurethekeepalivedetectionperiodof
theaccessuserintheaccesscontrolrule.
CommandModesNASconguration
Syntaxaaa<rule-id>keepalive{enable[period<period-value>]|
disable}
Syntax
Description
<rule-id>
Ruleidentier ,range:1~512
<period-value>Keepalivedetectionperiod,inseconds,range:
1~3600,default:10seconds
InstructionsThiscommandisappliedtoZXR10T240G/T160G/T64G/T40Gand
ZXR103900/3200only.
ExampleThisexampledescribeshowtocongurethekeepaliveperiodin
accesscontrolrule1to60seconds.
ZXR10(config)#nas
ZXR10(config-nas)#aaa1keepaliveenableperiod60
Related
Commands
showaaa
aaamultiple-hosts
PurposeUsethiscommandtocongurethemulti-useraccessunderthe
accesscontrolrule.
CommandModesNASconguration
Syntaxaaa<rule-id>multiple-hosts{enable[max-hosts<host-num
ber>]|disable}
Syntax
Description
<rule-id>
Ruleidentier ,range:1~512
<host-number>
Maximumnumberofaccessusersunderthe
rule,range:0~2048,themaximumvalue:
2048,default:0
InstructionsThiscommandisappliedtoZXR10T240G/T160G/T64G/T40Gand
ZXR103900/3200only.
ExampleThisexampledescribeshowtoactivate10accessusersinaccess
controlrule1.
ZXR10(config)#nas
ZXR10(config-nas)#aaa1multiple-hostsenablemax-hosts10
CondentialandProprietaryInformationofZTECORPORATION145