Zte ZXR10 - Urpf Log

ZXR10CommandManual(SecurityVolume)
ZXR10(config)#sshserverversion2
urpflog
PurposeUsethiscommandtoenable/disabletheUnicastReversePathFor-
warding(URPF)logswitch.
CommandModesGlobalconguration
Syntaxurpflog<log-switch>
Syntax
Description
<log-switch>
Logswitch,on/off,whenitison,theURPF
logisenabled,andwhenitisoff,theURPF
logisdisabled
InstructionsItisappliedtoZXR10GAR,ZXR10GERandZXR10T64E/T128,
ZXR10T160G.
ExampleThisexampledescribeshowtoenabletheURPFlogswitch.
ZXR10(config)#urpflogon
Related
Commands
ipverify
46CondentialandProprietaryInformationofZTECORPORATION