Zte ZXR10 - Crypto Map

ZXR10CommandManual(SecurityVolume)
ExampleThisexampledescribeshowtocreateIPSecsecuritypolicyand
thendeletethepolicy.
ZXR10(config)#cryptomapmymap123isakmp
ZXR10(config-crypto-map)#exit
ZXR10(config)#showcryptomapmymap
CryptoMap"mymap"123ipsec-isakmp:
Peer:1.1.1.66
accesslist:1500
Securityassociationlifetime:2560kilobytes/28800seconds
DHgroup:none
pfslevel(None/key-identity):none
Transformsets:{1
}
nesting:0
Dynamicmaptemplatetag:notconfigure
ZXR10(config)#nocryptomapmymap123
ZXR10(config)#cryptomapmymap111isakmp
ZXR10(config-crypto-map)#end
ZXR10#clearcryptomapmymap
Related
Commands
cryptomap
showcryptomap
cryptomap
PurposeUsethiscommandtobindapolicytotheinterface.
CommandModesInterfaceconguration
Syntaxcryptomap<map-name>
nocryptomap<map-name>
Syntax
Description
<map-name>
Securitypolicysetname,lessthan18
characters
Instructions�Theplatformversion4.8.01andupgradeversionssupportthis
command.
�ItisimplementedmainlyonGARcurrently.
�Apolicysetcanbeappliedondifferentinterfaces.Therecan
beonlyonepolicysetononeinterface.Thepolicysetisset
fordifferentinterfacesaccordingtobusinessneedsandthere
mustbetheinterfacename.
ExampleThisexampledescribeshowtosetIPSecsecuritypolicynamed
mymapandbindthemapontheinterfacefei_1/1.
ZXR10(config)#interfacefei_1/1
ZXR10(config-if)#cryptomapmymap
ZXR10#showruninfei_1/1
Buildingconfiguration...
!
interfacefei_1/1
ipaddress1.1.1.66255.255.255.0
negotiationauto
cryptomapmymap
Related
Commands
showrunning-configinterface
cryptomap
72CondentialandProprietaryInformationofZTECORPORATION