Zte ZXR10 - Dot1 X Re-Authentication; Dot1 X Server-Timeout

ZXR10CommandManual(SecurityVolume)
Syntax
Description
<period>
Periodwhenthereisnoresponseforthis
clientaftertheclientauthenticationfails,
inseconds,range:0~65535,default:60
seconds
InstructionsThiscommandisappliedtoZXR10T160G/T64G/T40GandZXR10
3900/3200only.
ExampleThisexampledescribeshowtosetthequietperiodoftheaccess
controlto30seconds.
ZXR10(config)#nas
ZXR10(config-nas)#dot1xquiet-period30
Related
Commands
showdot1x
dot1xre-authentication
PurposeUsethiscommandtosettheaccesscontrolre-authentication.
CommandModesNASconguration
Syntaxdot1xre-authentication{enable[period<period>]|disable}
Syntax
Description
<period>Accesscontrolre-authenticationperiod,in
seconds,range:1~4294967295,default:
3600seconds
InstructionsThiscommandisappliedtoZXR10T160G/T64G/T40GandZXR10
3900/3200only.
ExampleThisexampledescribeshowtosettheaccesscontrolre-authenti-
cationperiodto60seconds.
ZXR10(config)#nas
ZXR10(config-nas)#dot1xre-authenticationenableperiod60
Related
Commands
showdot1x
dot1xserver-timeout
PurposeUsethiscommandtosetthetimeoutoftheaccesscontroltowait
fortheauthenticationserverresponse.
CommandModesNASconguration
Syntaxdot1xserver-timeout<period>
Syntax
Description
<period>
Timeoutoftheaccesscontroltowaitforthe
authenticationserverresponse,inseconds,
range:1~65535,default:30seconds
160CondentialandProprietaryInformationofZTECORPORATION