A-1
Appendix A Package, Transportation and
Storage
It describes the packing methods, storage conditions and transportation precautions. It
serves as a guide to the transportation, unpacking, installation and relocation of the
equipment.
A.1 Package
The following parts are included in the package of the ZXB10-S300:
1. For details about W140A and its fittings, see Error! Reference source not
found.
Error! Reference source not found.
.
2. A set of delivery attached documents
3. A warranty card
4. A quality certificate
Outside each package, there are obvious marks indicating the model, product name,
placement direction, warnings against moisture, water and breakage. Avoid damages,
confusion and mismatching while storing and transporting the equipment.
A.2 Transportation
Operate according to the transportation marks on the containers.
When loaded, the heavier or bigger containers are arranged at the bottom. The
barycenter height should be less than 2m. Containers are piled up orderly and securely.
The loading weight shall not exceed the allowed loading capacity.
When loading the equipment onto the vehicle, the requirements for the height of the
goods in transportation must be followed. Keep the package flat and straight in the
truck.
During transportation, the speed of the truck should be kept within 25 km/h ~ 45 km/h
based on the actual road conditions.
To Next Page
Loading...
