Zte ZXR10 - Commands to Configure 802.1 X Parameters

Chapter Error! Style not defined. Error! Style not defined.
5-9
Parameter description:
Name Range Description
A.B.C.D IP address
Multicasting address for the integrated management
of the equipment
[0~65535] 0~65535
Snooping port number for the integrated management
of the equipment
2. discover manager
Command mode: Configure mode
Function: Configure the multicasting address and port number for the integrated
management server
Command format: wlan (config) #discover manager A.B.C.D [0~65535]
Parameter description:
Name Range Description
A.B.C.D IP address
Multicasting address for the integrated management
server
[0~65535] 0~65535
Snooping port number for the integrated management
server
5.4.5 Commands to Configure 802.1X Parameters
1. dot1x enable
Command mode: Configure mode
Function: Enable or disable 802.1x
Command format: wlan (config) #[no] dot1x enable
2. dot1x max-reauth
Command mode: Configure mode
Function: Configure the maximum number of attempts for 802.1x authentication
Command format: wlan (config)# dot1x max-reauth max-reauth-times
Parameter description:
Name Range Description
max-reauth-times 0~10
the maximum number of attempts for 802.1x
authentication