Chapter Error! Style not defined. Error! Style not defined.
6-11
This page displays the name, location and contact information of the current SNMP
management equipment. You can also configure the related information of the NE in
this page, including NE ID, NE code and NE creation date and time.
6.3.5.5 Trap page
Click Trap in the SNMP menu to display the page as shown in Fig. 6.3-10.
Fig. 6.3-10 Trap configuration page of the SNMP module
This page is used to configure the Trap of the SNMP module, with two parameters for
configuration:
Enable Trap
and Enable Authentication Failure Trap
.
6.3.5.6
Trap Sink page
Click Trap Sink in the SNMP menu to display the page as shown in Fig. 6.3-11.
To Next Page
Loading...
