ZXV10 H11X (V1.0)Home Gateway User’s Manual
130 Confidential and Proprietary Information of ZTE CORPORATION
Step 2 SIP Protocol Configuration
1. Click the SIP Protocol link on the left part to enter the
SIP configuration page.
2. Select the uplink interface and port from the Host
Information field.
3. Fill in the IP address (or domain name) and port for the
first proxy server in the First Proxy field. The IP address
(or domain name) and port are provided by the service
provider.
4. For the IP address and port in the Second Proxy field,
you can use the default values unless the service provider
has special requirements.
5. For the phone numbers, passwords and enabling flags
configured for the two phone interfaces, the service
provider should provide the corresponding values.
6. Click the Apply button to finish the basic SIP protocol
configuration.
To Next Page
Loading...
