ZXV10 H11X (V1.0)Home Gateway User’s Manual
58 Confidential and Proprietary Information of ZTE CORPORATION
Enable UPnP
Enabling switch the UPnP function
WAN Connection
Selecting the WAN side connection interface
LAN Connection
Selecting the LAN side interface
Static Route and Dynamic Route
Configuration
Click the Route link at the left side of the page to enter the route
configuration page of the H110, which is used to configure static
route and RIP dynamic route.
Static Route
Click the Static Route link to enter the Static Route page, which
displays the static route information list of the H110. You can
configure a new route entry, or modify and delete the existing route
entry.
To Next Page
Loading...
