Zte ZXV10 H11X - Langroup Configuration

ZXV10 H11X (V1.0)Home Gateway User’s Manual
36 Confidential and Proprietary Information of ZTE CORPORATION
Note: You can click the Save button at the right
upper corner on the page to save the current
configuration information. To ensure all the
configuration information will not be lost after
powering off, it must be saved. Click Log Out
button at the right upper corner on the interface to
exit user login and return to the login page.
LanGroup Configuration
Click the LanGroup1 link in the LAN Configuration table to enter
the LanGroup1 Configuration page, where you can set the
protocol and network layer related information in the basic LAN
Group.
 IP Address
IP address of the LAN group (interface subnet)
 NetMask