Confidential and Proprietary Information of ZTE CORPORATION 25
Chapter 3
Preparations for
Configuration
Normally, your ISP has already configured the H110, so you can
directly connect and use it. However, you may need to configure it in
some special cases. Now, you need to take the following
configuration steps:
Use one crossover or straight-through Ethernet cable to connect
a PC directly to the Ethernet port of the H110.
Confirm that the TCP/IP settings of the PC are correct.
Disable any running firewall or security software.
Disable the proxy server setting of the explorer.
Get some data from your service provider. You can consult your
service provider for details.
Installing TCP/IP
If your PC has not yet been installed with TCP/IP, just install it in the
following steps.
Let us take the Ethernet interface under Local Connection in the
Windows 2000 system for an example.
Click Start, select Settings, and then click Network and Dial-
up Connections.
To Next Page
Loading...
