Chapter 4 - Basic Configuration
Confidential and Proprietary Information of ZTE CORPORATION 37
Subnet mask of the LAN group
Enable STP
Enabling STP (Spanning Tree Protocol); STP can provide
path redundancy. Even if abnormal loop is caused by
multiple effective paths in the network and the network
gets faulty, STP can be used to ensure one effective path
in two terminals.
Enable DHCP
Enabling/disabling DHCP
Using DHCP Server
Enabling the device as DHCP server function; IP address
can be allocated to the client.
Start IP
Start IP address allocated by the DHCP Server
End IP
End IP address allocated by the DHCP Server
NetMask
IP subnet mask allocated by the DHCP Server
Gateway
Gateway IP address used by the DHCP client
Domain
Domain name used for DHCP management
DNS
Domain name server address
NTP Server
Address of the NTP server
Lease Time
To Next Page
Loading...
