Touchscreen User Manual – Issue 1
Zytronic X-Y Controller (Serial and USB) 2
CONTENTS
User Manual Issue Record 4
Explanation of Symbols Used Within This Manual 4
1.0 INTRODUCTION 5
1.1 About This Manual 5
1.2 Shipping Damage 5
1.3 Care and Cleaning 5
1.4 Unpacking Your Touchscreen 5
1.5 The Zytronic Projected Capacitive X-Y Controller Touchscreen 6
1.6 Variants of the Zytronic Projected Capacitive X-Y Controller Touchscreen 6
1.7 Zytronic Projected Capacitive X-Y Controller Touchscreen Driver Software 6
1.8 Software Compatibility 6
1.9 Before You Begin 7
1.10 Contacting Zytronic 7
2.0 INSTALLING THE ZYTRONIC PROJECTED CAPACITIVE X-Y
CONTROLLER
TOUCHSCREEN 8
2.1 Typical Sensor Integration Guidelines 8
2.2 Typical Controller PCB Integration Guidelines 11
2.2.1 Controller PCB Card step-by-step Integration 13
2.3 Connecting the Sensor to the Controller PCB card and powering up the Device 15
2.3.1 Connecting the Sensor to the Controller PCB card 15
2.3.2 Powering up the Touchscreen Controller PCB card 17
2.4 Controller Operational Status LED Indicators 18
2.5 Integration Disclaimer 19
3.0 INSTALLING THE ZYTRONIC PROJECTED CAPACITIVE X-Y
CONTROLLER TOUCHSCREEN DRIVER SOFTWARE 20
3.1 Zytronic Projected Capacitive X-Y Controller Touchscreen Driver Software
– Universal Point Device Driver (UPDD) 20
3.2 Driver Software Installation 20
3.3 Connecting the Zytronic Projected Capacitive X-Y Controller Touchscreen to the
Host Computer 23
3.3.1 Connecting the Serial Controller to the Host Computer 23
3.3.2 Connecting the USB Controller to the Host Computer 23
4.0 QUICK CONFIGURATION OF THE UPDD DRIVER AND PROJECTED
CAPACITIVE X-Y CONTROLLER TOUCHSCREEN 27
4.1 Launching the UPDD Console and setting up the Touchscreen 27
4.2 Help Page 31
4.3 EEPROM Calibration Data Storage 32
4.4 Multi-Monitor Touchscreen Operation 32
4.5 Process to Uninstall the UPDD Projected Capacitive Touchscreen Driver 35
To Next Page
Loading...