EasyManua.ls Logo

Zytronic Projected Capacitive X-Y controller Touchscreen - 7 Zytronic Projected Capacitive X-Y Controller Touchscreen Technical Specification

Default Icon
51 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Touchscreen User Manual – Issue 1
Zytronic X-Y Controller (Serial and USB) 48
7.0 ZYTRONIC PROJECTED CAPACITIVE X-Y CONTROLLER
TOUCHSCREEN TECHNICAL SPECIFICATION
Sensor
Detection Method Projected Capacitive Technology (PCT™)
Sensor Glass with embedded micro-fine sensing array
Size Range Sizes 5.7” thru 23”
Controller
Electronics Remote PCB, Serial or USB
Power Requirements USB Controller powered from regulated VBUS 5V dc ±5% (max)
tolerance, Serial Controller powered by regulated 5V dc ±5% (max)
external power supply
EMC CE, FCC
ESD ±25kV Air Discharge when mounted in plastic bezel.
Per EN 61000-4-2, 1995:
Resolution <1mm
Speed of Response <10ms
Positional Accuracy <1.5% of reported position in recommended viewing area.
Optics
Optical Resolution >4 lines/mm (NBS1963A)
Light Transmission ~90%
Haze <3% (Gardner Haze)
Environment
Operating Temperature -20°C - >+60°C
Humidity 90%RH @ 40°C
Storage Temperature -30°C - >+70°C
Storage Humidity 90%RH @ 40°C
Resistance to Contamination Sensing media protected by glass.
Water Resistance Unaffected by water droplets or condensation
Mechanical
Immunity to Damage Glass surface with no moving parts
Sensor Thickness <3mm
Stylus Type Finger, gloved hand
Operation Force < 0.1g
Hardness Glass hardness – Mohs 7
Sensor MTBF Glass with no moving parts or coatings.
No known wear out mechanisms
Sealability Can be sealed to meet NEMA 4 & 12, and IP 65 standards
Vibration In accordance with IEC 60068-2-64 when installed in a suitable bezel
Glass Options Plain, AG, options. Thermally/Chemically toughened
Driver Software
Calibration drift One time calibration, no drift
Functionality Activate on touch, activate on release, drag & drop, double click, right click
Multiple Monitors Option available for multiple monitor use
Connectivity Serial RS232, USB v1.1 compatible with USB 2.0
Drive OS Supported Windows®, Windows® Embedded, Windows® CE, Linux available on
request.
Protocol Controller output protocol available on request to allow users to customise
their own driver design

Table of Contents