Touchscreen User Manual – Issue 1
Zytronic X-Y Controller (Serial and USB) 7
Contact your supplier for further information on specific variants of operating systems that are
supported.
Note: This manual describes Windows based procedures only.
1.9 Before You Begin
Before proceeding with the touchscreen installation ensure the following:
¾ Your Windows operating system is correctly installed and operating with your mouse.
¾ Ensure that all other touchscreen manufactures Driver Software/old touchscreen Driver
software is uninstalled from the host computer to avoid software conflicts.
¾ Ensure that there is a free Serial Com Port or USB port available on the host computer to
connect the desired Zytronic Projected Capacitive X-Y Controller Touchscreen.
¾ For Serial controller devices ensure that no other device/software is using the selected Com
Port.
¾ Ensure that the Zytronic Projected Capacitive X-Y Controller Touchscreen is NOT
connected
until the UPDD Driver Software has been successfully installed first.
¾ Ensure that Industry standard Anti static procedures for electronic equipment are followed
during unpacking and installation of the product.
1.10 Contacting Zytronic
Sales and Technical support:
Zytronic Plc. Tel: +44 (0)191 414 5511
Patterson Street Fax: +44 (0)191 414 0545
Blaydon
Tyne and Wear E-mail: info@zytronic.co.uk
NE21 5SG
United Kingdom Web: http://www.zytronic.co.uk
To Next Page
Loading...