ZyXEL Communications AMG1312-T Series - The NAT Screen

Chapter 19 Traffic Status
AMG1312-T Series User’s Guide
198
19.4 The NAT Screen
Click System Monitor > Traffic Status > NAT to open the following screen. You can view the NAT
status of the AMG1312-T Series’s client(s) in this screen.
Figure 106 System Monitor > Traffic Status > NAT
The following table describes the fields in this screen.
Data This indicates the number of transmitted packets on this interface.
Error This indicates the number of frames with errors transmitted on this interface.
Drop This indicates the number of outgoing packets dropped on this interface.
Received (Packet)
Data This indicates the number of received packets on this interface.
Error This indicates the number of frames with errors received on this interface.
Drop This indicates the number of received packets dropped on this interface.
Table 81 System Monitor > Traffic Status > LAN (continued)
LABEL DESCRIPTION
Table 82 System Monitor > Traffic Status > NAT
LABEL DESCRIPTION
Refresh Interval Select how often you want the AMG1312-T Series to update this screen from the drop-
down list box.
Set Interval
Click this button to apply the new poll interval you entered in the Refresh Interval field.
Stop Click Stop to stop refreshing statistics.
Device Name This shows the name of the client.
IP Address This shows the IP address of the client.
MAC Address This shows the MAC address of the client.
No. of Open
Session
This shows the number of NAT sessions used by the client.