ZyXEL Communications AMG1312-T Series - Main Window; Navigation Panel

Chapter 2 Introducing the Web Configurator
AMG1312-T Series User’s Guide
24
2.2.2 Main Window
The main window displays information and configuration fields. It is discussed in the rest of this
document.
After you click System Info on the Connection Status screen, the System Info screen is
displayed. See Chapter 5 on page 64 for more information about the System Info screen.
If you click LAN Device on the System Info screen, the Connection Status screen appears. See
Chapter 5 on page 63 for more information about the Connection Status screen.
If you click Virtual Device on the System Info screen, a visual graphic appears, showing the
connection status of the AMG1312-T Series’s ports. The connected ports are in color and
disconnected ports are gray.
2.2.3 Navigation Panel
Use the menu items on the navigation panel to open screens to configure AMG1312-T Series
features. The following table describes each menu item.
Table 2 Navigation Panel Summary
LINK TAB FUNCTION
Connection Status This screen shows the network status of the AMG1312-T Series
and computers/devices connected to it.
Network Setting
Broadband Internet
Connection
Use this screen to configure ISP parameters, WAN IP address
assignment, DNS servers and other advanced properties.
More Connections Use this screen to configure additional WAN connections.
3G Backup Use this screen to configure 3G WAN connection.
Wireless General Use this screen to turn the wireless connection on or off, specify
the SSID(s) and configure the wireless LAN settings and WLAN
authentication/security settings.
More/guest AP Use this screen to configure multiple BSSs on the AMG1312-T
Series.
MAC
Authentication
Use this screen to block or allow wireless traffic from wireless
devices of certain SSIDs and MAC addresses to the AMG1312-T
Series.
WPS Use this screen to use WPS (Wi-Fi Protected Setup) to establish a
wireless connection.
WDS
Use this screen to set up Wireless Distribution System (WDS) links
to other access points.
WMM Use this screen to enable or disable Wi-Fi MultiMedia (WMM).
Scheduling Use this screen to configure when the AMG1312-T Series enables
or disables the wireless LAN.
Advanced Use this screen to configure advanced wireless settings such as
output power.