Chapter 4 Tutorials
AMG1312-T Series User’s Guide
40
Example WPS Process: PBC Method
PIN Configuration
When you use the PIN configuration method, you need to use both the AMG1312-T Series’s web
config ur at or and the wireless client’s utility.
1 Launch your wireless client’s configuration utility. Go to the WPS settings and select the PIN method
to get a PIN number.
2 Enter the PIN number in the PIN section in the Network Setting > Wireless > WPS screen on
the AMG1312-T Series.
Wireless Client
The Device
SECURITY INFO
COMMUNICATION
WITHIN 2 MINUTES
Press and hold for
5 seconds
To Next Page
Loading...
