Chapter 25 Remote Management
AMG1312-T Series User’s Guide
214
Use this screen to specify which interfaces allow FTP access and from which IP address the access
can come. To change your AMG1312-T Series’s FTP settings, click Maintenance > RemoteMGMT
> FTP. The screen appears as shown.
Figure 123 Maintenance > RemoteMGMT > FTP
The following table describes the labels in this screen.
25.5 The SNMP Screen
Simple Network Management Protocol is a protocol used for exchanging management information
between network devices. Your AMG1312-T Series supports SNMP agent functionality, which allows
a manager station to manage and monitor the AMG1312-T Series through the network. The
AMG1312-T Series supports SNMP version one (SNMPv1) and version two (SNMPv2c). The next
figure illustrates an SNMP management operation.
Table 91 Maintenance > RemoteMGMT > FTP
LABEL DESCRIPTION
Server Port This displays the service port number for accessing the AMG1312-T Series. If the
number is grayed out, it is not editable.
Server Access Select the interface(s) through which a computer may access the AMG1312-T Series
using this service.
Secured Client IP
Address
A secured client is a “trusted” computer that is allowed to communicate with the
AMG1312-T Series using this service.
Select All to allow any computer to access the AMG1312-T Series using this service.
Choose Range to just allow the computer(s) with an IP address in the range that you
specify to access the AMG1312-T Series using this service.
Apply Click this to save your changes.
Cancel Click this to restore your previously saved settings.
To Next Page
Loading...
