Chapter 3 Internet / Wireless Setup Wizard
AMG1312-T Series User’s Guide
30
Figure 11 Internet Connection with PPPoA
The following table describes the fields in this screen.
Table 5 Internet Connection with PPPoA
LABEL DESCRIPTION
Encapsulation Select the encapsulation type your ISP uses from the Encapsulation drop-down list
box: IPoA, ENET ENCAP, PPPoA, or PPPoE.
User Name Enter the login name that your ISP gives you.
Password Enter the password associated with the user name above.
Multiplex Select the multiplexing method used by your ISP from the Multiplex drop-down list
box either VC-based or LLC-based.
VPI Enter the Virtual Path Identifier (VPI) assigned to you. This field may already be
configured.
VCI Enter the Virtual Channel Identifier (VCI) assigned to you. This field may already be
configured.
IP Address Enter the IP address of the AMG1312-T Series.
Primary DNS Server Enter the primary DNS server IP address for the AMG1312-T Series.
Secondary DNS
Server
Enter the secondary DNS server IP address for the AMG1312-T Series.
Back Click this to return to the previous screen without saving.
Apply Click this to save your changes.
Exit Click this to close the wizard screen without saving.
To Next Page
Loading...
