Chapter 4 Tutorials
AMG1312-T Series User’s Guide
57
1 Click Network Setting > QoS and check Active QoS. Click Apply.
Tutorial: Advanced > QoS
2 Go to Network Setting > QoS > Queue Setup. Click the Edit icon next to an entry to configure
a queue.
3 Select Active and give it a name (Queue1 in this example). Select WAN in the Interface field and
1 in the Priority and Weight fields. Then click OK.
Tutorial: Advanced > QoS > Queue Setup
4 Go to Network Setting > QoS > Class Setup and click Add new Classifier.
5 Select Active and follow the settings as shown in the screen below. Then click OK. Note that you
have to select TCP in the IP Protocol field first, then you can configure the source port range
setting.
To Next Page
Loading...
