ZyXEL Communications GS1200 SERIES - Power Connector

Chapter 3 Hardware Panels
GS1200 Series User’s Guide
17
Figure 10 Rear Panel: GS1200-5
Figure 11 Rear Panel: GS1200-5HP v2
Figure 12 Rear Panel: GS1200-8
Figure 13 Rear Panel: GS1200-8HP v2
3.2.1 Power Connector
Note: Make sure you are using the correct power source as shown on the panel.
To connect power to the Switch, insert the female end of the power cord to the AC power receptacle
on the rear panel. Connect the other end of the supplied power cord to a power outlet. Make sure that
no objects obstruct the airflow.