ZyXEL Communications GS1200 SERIES - Switch Tutorials; Creating VLANs and Setting Port VID

Chapter 6 Tutorials
GS1200 Series User’s Guide
27
CHAPTER 6
Tutorials
6.1 Overview
This chapter shows you how to set up the Switch’s various features.
• Creating a VLAN and Setting Port VID
• Setting Up Bandwidth Control
• Setting Up QoS (Quality of Service)
• Upgrade Firmware on the Switch
• Back up a Configuration File
• Restore Configuration
• Power over Ethernet (PoE) Configuration
6.2 Creating a VLAN and Setting Port VID
By default, all ports on the Switch are in VLAN 1.
VLANs confine broadcast frames to the VLAN group in which the ports belongs. You can create a VLAN
group with fixed port members to do this.
If you want to have a port (for example port 1) belong to another VLAN as well, say VLAN 2, you need to
create a VLAN first, and then add the port to the VLAN.
Figure 21 Initial Setup Network Example: VLAN
1 Click VLAN in the navigation panel and click the Create New VLAN button.