ZyXEL Communications GS1200 SERIES - Setting Port VID

Chapter 6 Tutorials
GS1200 Series User’s Guide
29
6.2.1 Setting Port VID
Use PVID to add a tag to incoming untagged frames received on that port so that the frames are
forwarded to the VLAN group that the tag defines.
In the example network, configure 2 as the port VID on port 1 so that any untagged frames received on
that port get sent to VLAN 2.
Figure 22 Initial Setup Network Example: Port VID
1 Click VLAN in the navigation panel.
2 Enter 2 in the PVID field for port 2 and click Apply to save your changes back to the Switch.