Chapter 6 Tutorials
GS1200 Series User’s Guide
35
Figure 24 Firmware Upgrade Path
5 After a successful upload, the system will reboot, and you will need to log into the Switch again. Click
OK.
Figure 25 Firmware Upgrade Confirmation
If you click the Cancel button in the Firmware Upgrade page, the Switch will reboot, and you will be
directed to the login screen.
6.6 Back up a Configuration File
Back up a configuration file in case you want to return to your previous settings.
1 Click Management in the navigation panel and click the Backup button.
2 Specify the location where you want to save the backup file. The default filename is switch_cfg.bin.
3 Click the Save button to save and store your current Switch settings.
To Next Page
Loading...
