Chapter 22 IPv6
GS1920v2 Series User’s Guide
126
CHAPTER 22
IPv6
22.1 IPv6 Overview
This chapter introduces the IPv6 screens.
22.1.1 What You Can Do
• Use the IPv6 Status screen (Section 22.2 on page 126) to view the IPv6 table and DNS server
information.
• Use the IPv6 Global Setup screen (Section 22.3 on page 129) to configure the global IPv6 settings.
• Use the IPv6 Interface Setup screen (Section 22.4 on page 130) to view and configure IPv6 interfaces.
• Use the IPv6 Link-Local Address Setup screen (Section 22.5 on page 131) to view and configure IPv6
link-local addresses.
• Use the IPv6 Global Address Setup screen (Section 22.6 on page 132) to view and configure IPv6
global addresses.
• Use the IPv6 Neighbor Discovery Setup screen (Section 22.7 on page 134) to view and configure
neighbor discovery settings on each interface.
• Use the IPv6 Neighbor Setup screen (Section 22.8 on page 135) to configure static IPv6 neighbor
entries in the Switch’s IPv6 neighbor table.
• Use theDHCPv6 Client Setup screen (Section 22.9 on page 137) to configure the Switch’s DHCP
settings when it is acting as a DHCPv6 client.
22.2 IPv6 Status
Click SYSTEM > IPv6 > IPv6 Status in the navigation panel to display the IPv6 status screen as shown next.
Figure 82 SYSTEM > IPv6 > IPv6 Status
To Next Page
Loading...
