ZyXEL Communications GS1920-24v2 - Configure Rapid Spanning Tree Protocol

Chapter 46 Spanning Tree Protocol
GS1920v2 Series User’s Guide
274
46.5 Configure Rapid Spanning Tree Protocol
Use this screen to configure RSTP settings, see Section 46.1 on page 268 for more information on RSTP.
Click SWITCHING > Spanning Tree Protocol > RSTP in the navigation panel to display the screen as shown.
Port Role This field displays the role of the port in STP.
• Root – A forwarding port on a non-root bridge, which has the lowest path cost and is the
best port from the non-root bridge to the root bridge. A root bridge does NOT have a root
port.
• Designated – A forwarding port on the designated bridge for each connected LAN
segment. A designated bridge has the lowest path cost to the root bridge among the
bridges connected to the LAN segment. All the ports on a root bridge (root switch) are
designated ports.
• Alternate – A blocked port, which has a best alternate path to the root bridge. This path is
different from using the root port. The port moves to the forwarding state when the
designated port for the LAN segment fails.
• Backup – A blocked port, which has a backup or redundant path to a LAN segment
where a designated port is already connected when a switch has two links to the same
LAN segment.
• Disabled – Not strictly part of STP. The port can be disabled manually.
Designated Bridge
ID
This field displays the identifier of the designated bridge to which this port belongs when the
port is a designated port. Otherwise, it displays the identifier of the designated bridge for the
LAN segment to which this port is connected.
Designated Port ID This field displays the priority and number of the bridge port (on the designated bridge),
through which the designated bridge transmits the stored configuration messages.
Designated Cost This field displays the path cost to the LAN segment to which the port is connected when the
port is a designated port. Otherwise, it displays the path cost to the root bridge from the
designated port for the LAN segment to which this port is connected.
Table 144 SWITCHING > Spanning Tree Protocol > Spanning Tree Protocol Status: RSTP (continued)
LABEL DESCRIPTION