Chapter 42 Differentiated Services
GS1920v2 Series User’s Guide
258
priorities of forwarding. Resources can then be allocated according to the DSCP values and the
configured policies.
DiffServ Network Example
The following figure depicts a DiffServ network consisting of a group of directly connected DiffServ-
compliant network devices. The boundary node (A in Figure 184) in a DiffServ network classifies (marks
with a DSCP value) the incoming packets into different traffic flows (Platinum, Gold, Silver, Bronze)
based on the configured marking rules. A network administrator can then apply various traffic policies to
the traffic flows. An example traffic policy, is to give higher drop precedence to one traffic flow over
others. In our example, packets in the Bronze traffic flow are more likely to be dropped when congestion
occurs than the packets in the Platinum traffic flow as they move across the DiffServ network.
Figure 184 DiffServ Network
42.2 Activating DiffServ
Activate DiffServ to apply marking rules or IEEE 802.1p priority mapping on the selected ports.
Click SWITCHING > QoS > Diffserv to display the screen as shown.
To Next Page
Loading...
