Chapter 32 OAM
GS1920v2 Series User’s Guide
193
Figure 131 PORT > OAM > OAM Status
The following table describes the fields in the above screen.
32.2.1 OAM Details
Use this screen to view OAM configuration details and operational status of a specific port. Click a
number in the Port column in the PORT > OAM > OAM Status screen to display the screen as shown next.
Table 91 PORT > OAM > OAM Status
LABEL DESCRIPTION
Local
This section displays information about the ports on the Switch.
Port This field displays the port number.
Mode This field displays the operational state of the port when OAM is enabled on the port.
Active – Allows the port to issue and respond to Ethernet OAM commands.
Passive – Allows the port to respond to Ethernet OAM commands.
Remote
This section displays information about the remote device.
Mac Address This field displays the MAC address of the remote device.
OUI This field displays the OUI (first 3 bytes of the MAC address) of the remote device.
Mode This field displays the operational state of the port when OAM is enabled on the port.
Active – Allows the port to issue and respond to Ethernet OAM commands.
Passive – Allows the port to respond to Ethernet OAM commands.
Config This field displays the capabilities of the Switch and remote device.
To Next Page
Loading...
