Chapter 49 VLAN
GS1920v2 Series User’s Guide
312
This feature allows users to change ports without having to reconfigure the VLAN. You can assign priority
to the MAC-based VLAN and define a MAC to VLAN mapping table by entering a specified source
MAC address in the MAC-based VLAN setup screen. You can also delete a MAC-based VLAN entry in
the same screen.
Click SWITCHING > VLAN > MAC Based VLAN Setup to see the following screen.
Figure 225 SWITCHING > VLAN > MAC Based VLAN Setup
The following table describes the fields in the above screen.
49.12.1 Add/Edit a MAC Based VLAN
Click Add/Edit, or select an entry and click Add/Edit in the SWITCHING > VLAN > MAC Based VLAN Setup
screen to see this screen.
Figure 226 SWITCHING > VLAN > MAC Based VLAN Setup > Add/Edit
Table 169 SWITCHING > VLAN > MAC Based VLAN Setup
LABEL
DESCRIPTION
Index This field displays the index number of the MAC-based VLAN entry.
Name This field displays the name of the MAC-based VLAN entry.
MAC Address This field displays the source MAC address that is bind to the MAC-based VLAN entry.
VID This field displays the VLAN ID of the MAC-based VLAN entry.
Priority This field displays the priority level which is assigned to frames belonging to this MAC-based
VLAN entity.
Select an entry’s check box to select a specific entry. Otherwise, select the check box in
the table heading row to select all entries.
Add/Edit Click Add/Edit to add a new entry or edit a selected one.
Delete Click Delete to remove the selected entry.
To Next Page
Loading...
