Chapter 6 Tutorials
MES-3528 User’s Guide
62
1 Access the Switch through http://192.168.1.1 by default. Log into the Switch
by entering the username (default: admin) and password (default: 1234).
2 Go to Advanced Application > VLAN > Static VLAN, and create a VLAN with ID
of 100. Add ports 5, 6 and 7 in the VLAN by selecting Fixed in the Control field as
shown.
Deselect Tx Tagging because you don’t want outgoing traffic to contain this VLAN
tag.
Click Add.
Figure 26 Tutorial: Create a VLAN and Add Ports to It
To Next Page
Loading...
