MES-3528 User’s Guide
77
CHAPTER 8
Basic Setting
This chapter describes how to configure the System Info, General Setup,
Switch Setup, IP Setup and Port Setup screens.
8.1 Overview
The System Info screen displays general Switch information (such as firmware
version number). The General Setup screen allows you to configure general
Switch identification information. The General Setup screen also allows you to
set the system time manually or get the current time and date from an external
server when you turn on your Switch. The real time is then displayed in the Switch
logs. The Switch Setup screen allows you to set up and configure global Switch
features. The IP Setup screen allows you to configure a Switch IP address in each
routing domain, subnet mask(s) and DNS (domain name server) for management
purposes.
8.2 System Information
In the navigation panel, click Basic Setting > System Info to display the screen
as shown. You can check the firmware version number.
Figure 40 Basic Setting > System Info
To Next Page
Loading...
