ZyXEL Communications Network Device P-2602 - WEP Encryption Screen; Figure 63 Wireless: no Security; Table 37 Wireless no Security

P-2602H(W)(L)-DxA Series User’s Guide
Chapter 9 Wireless LAN 127
Note: If you do not enable any wireless security on your ZyXEL Device, your network
is accessible to any wireless networking device that is within range.
Figure 63 Wireless: No Security
The following table describes the labels in this screen.
9.5.2 WEP Encryption Screen
In order to configure and enable WEP encryption; click Network > Wireless LAN to display
the General screen. Select Static WEP from the Security Mode list.
Table 37 Wireless No Security
LABEL DESCRIPTION
Security Mode Choose No Security from the drop-down list box.