P-2602H(W)(L)-DxA Series User’s Guide
304 Chapter 25 Tools
The ZyXEL Device automatically restarts in this time causing a temporary network
disconnect. In some operating systems, you may see the following icon on your desktop.
Figure 171 Network Temporarily Disconnected
After two minutes, log in again and check your new firmware version in the Status screen.
If the upload was not successful, the following screen will appear. Click Return to go back to
the Firmware screen.
Figure 172 Error Message
25.5 Backup and Restore
See Section 25.7 on page 308 and Section 25.8 on page 310 for transferring configuration files
using FTP/TFTP commands.
Click Maintenance > Tools > Configuration. Information related to factory defaults, backup
configuration, and restoring configuration appears as shown next.
To Next Page
Loading...
