P-2602H(W)(L)-DxA Series User’s Guide
80 Chapter 5 Bandwidth Management Wizard
Figure 39 Bandwidth Management Wizard: General Information
The following fields describe the label in this screen.
4 If you select Service Setup, use the second wizard screen to select the services that you
want to apply bandwidth management and select the priorities that you want to apply to
the services listed.
Figure 40 Bandwidth Management Wizard: Service Configuration
Table 19 Bandwidth Management Wizard: General Information
LABEL DESCRIPTION
Active Select the Active check box to have the ZyXEL Device apply bandwidth
management to traffic going out through the ZyXEL Device’s WAN, LAN or WLAN
port.
Select Auto Classifier to automatically allocate bandwidth to packets based on the
packet size or Services Setup to allocate bandwidth based on the service
requirements.
Back Click Back to display the previous screen.
Next Click Next to proceed to the next screen.
Exit Click Exit to close the wizard screen without saving.
To Next Page
Loading...
