P-2602H(W)(L)-DxA Series User’s Guide
Chapter 9 Wireless LAN 137
9.8 QoS Screen
The QoS screen by default allows you to automatically give a service a priority level.
Click Network > Wireless LAN > QoS. The following screen displays.
Figure 75 Wireless LAN: QoS
The following table describes the fields in this screen.
MAC Address
Enter the MAC addresses of the wireless station that are allowed or denied access to
the ZyXEL Device in these address fields. Enter the MAC addresses in a valid MAC
address format, that is, six hexadecimal character pairs, for example,
12:34:56:78:9a:bc.
Apply Click Apply to save your changes back to the ZyXEL Device.
Cancel Click Cancel to reload the previous configuration for this screen.
Table 43 MAC Address Filter
LABEL DESCRIPTION
Table 44 Wireless LAN: QoS
LABEL DESCRIPTION
QoS Setup
Enable WMM QoS Select the check box to enable WMM QoS on the ZyXEL Device.
To Next Page
Loading...
