EasyManua.ls Logo

ZyXEL Communications Network Device P-2602 - Figure 208 Windows XP: Internet Protocol (TCP;IP) Properties; Verifying Settings

ZyXEL Communications Network Device P-2602
427 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
P-2602H(W)(L)-DxA Series User’s Guide
348 Appendix C Setting up Your Computer’s IP Address
7 In the Internet Protocol TCP/IP Properties window (the General tab in Windows XP):
Click Obtain DNS server address automatically if you do not know
your DNS server IP address(es).
If you know your DNS server IP address(es), click Use the following
DNS server addresses, and type them in the Preferred DNS server
and Alternate DNS server fields.
If you have previously configured DNS servers, click Advanced and
then the DNS tab to order them.
Figure 208 Windows XP: Internet Protocol (TCP/IP) Properties
8 Click OK to close the Internet Protocol (TCP/IP) Properties window.
9 Click OK to close the Local Area Connection Properties window.
10Turn on your ZyXEL Device and restart your computer (if prompted).
Verifying Settings
1 Click Start, All Programs, Accessories and then Command Prompt.
2 In the Command Prompt window, type "
ipconfig" and then press [ENTER]. You can
also open Network Connections, right-click a network connection, click Status and then
click the Support tab.

Table of Contents

Related product manuals