ZyXEL Communications Network Device P-2602 - Verifying Settings; Figure 210 Macintosh os 8;9: TCP;IP; Figure 211 Macintosh os X: Apple Menu; Macintosh os X

P-2602H(W)(L)-DxA Series User’s Guide
350 Appendix C Setting up Your Computer’s IP Address
Figure 210 Macintosh OS 8/9: TCP/IP
3 For dynamically assigned settings, select Using DHCP Server from the Configure: list.
4 For statically assigned settings, do the following:
•From the Configure box, select Manually.
• Type your IP address in the IP Address box.
• Type your subnet mask in the Subnet mask box.
• Type the IP address of your ZyXEL Device in the Router address
box.
5 Close the TCP/IP Control Panel.
6 Click Save if prompted, to save changes to your configuration.
7 Turn on your ZyXEL Device and restart your computer (if prompted).
Verifying Settings
Check your TCP/IP properties in the TCP/IP Control Panel window.
Macintosh OS X
1 Click the Apple menu, and click System Preferences to open the System Preferences
window.
Figure 211 Macintosh OS X: Apple Menu