ZyXEL Communications Network Device P-2602 - Verifying Settings; Figure 202 Windows 95;98;Me: TCP;IP Properties: DNS Configuration; Windows 2000;NT;XP

P-2602H(W)(L)-DxA Series User’s Guide
344 Appendix C Setting up Your Computer’s IP Address
Figure 202 Windows 95/98/Me: TCP/IP Properties: DNS Configuration
4 Click the Gateway tab.
• If you do not know your gateway’s IP address, remove previously
installed gateways.
• If you have a gateway IP address, type it in the New gateway field
and click Add.
5 Click OK to save and close the TCP/IP Properties window.
6 Click OK to close the Network window. Insert the Windows CD if prompted.
7 Turn on your ZyXEL Device and restart your computer when prompted.
Verifying Settings
1 Click Start and then Run.
2 In the Run window, type "winipcfg" and then click OK to open the IP Configuration
window.
3 Select your network adapter. You should see your computer's IP address, subnet mask
and default gateway.
Windows 2000/NT/XP
1 For Windows XP, click start, Control Panel. In Windows 2000/NT, click Start,
Settings, Control Panel.