ZyXEL Communications Network Device P-2602 - Reset to Factory Defaults; Restart; Figure 177 Reset Warning Message; Figure 178 Reset in Process Message

P-2602H(W)(L)-DxA Series User’s Guide
Chapter 25 Tools 307
25.5.3 Reset to Factory Defaults
Click the Reset button to clear all user-entered configuration information and return the
ZyXEL Device to its factory defaults. The following warning screen appears.
Figure 177 Reset Warning Message
Figure 178 Reset In Process Message
You can also press the RESET button on the rear panel to reset the factory defaults of your
ZyXEL Device. Refer to Section 2.1.2 on page 51 for more information on the RESET button.
25.6 Restart
System restart allows you to reboot the ZyXEL Device without turning the power off.
Click Maintenance > Tools > Restart. Click Restart to have the ZyXEL Device reboot. This
does not affect the ZyXEL Device's configuration.
Figure 179 Restart Screen