Chapter 9 System
NWA1121-NI User’s Guide
105
To change your NWA1121-NI’s WWW settings, click System > WWW. The following screen shows.
Figure 49 System > WWW
The following table describes the labels in this screen.
9.5 Certificates Screen
Use this screen to delete or import certificates.
Table 30 System > WWW
LABEL DESCRIPTION
WWW
HTTP Port You may change the server port number for a service if needed, however you must use
the same port number in order to use that service for remote management.
HTTPS Port The HTTPS proxy server listens on port 443 by default. If you change the HTTPS proxy
server port to a different number on the NWA1121-NI, for example 8443, then you must
notify people who need to access the NWA1121-NI web configurator to use “https://
NWA1121-NI IP Address:8443” as the URL.
Server Access Select the interface(s) through which a computer may access the NWA1121-NI using
WWW and to which the IP and MAC filtering rules you specified below are applied.
Otherwise, select Disable to allow any computer to access the NWA1121-NI through
any interface using WWW.
Secured Client IP
Address
A secured client is a “trusted” computer that is allowed to communicate with the
NWA1121-NI using this service.
Select All to allow any computer to access the NWA1121-NI using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the NWA1121-NI using this service.
Secured Client
MAC Address
Select All to allow any computer to access the NWA1121-NI using this service.
Choose Selected to just allow the computer with the MAC address that you specify to
access the NWA1121-NI using this service.
Apply Click Apply to save your customized settings.
Cancel Click Cancel to begin configuring this screen afresh.
To Next Page
Loading...
