NWA1121-NI User’s Guide 49
CHAPTER 5
Monitor
5.1 Overview
This chapter discusses read-only information related to the device state of the NWA1121-NI.
Note: To access the Monitor screens, you can also click the links in the Summary table of
the Dashboard screen to view the wireless packets sent/received as well as the
status of clients connected to the NWA1121-NI.
5.2 What You Can Do
•Use the Logs screen to see the logs for the categories that you selected in the Configuration >
Log Settings screen (see Section 5.3 on page 49). You can view logs in this page. Once the log
entries are all used, the log will wrap around and the old logs will be deleted.
•use the Statistics screen to view 802.11 mode, channel number, wireless packet specific
statistics and so on (see Section 5.4 on page 50).
•Use the Association List screen to view the wireless devices that are currently associated to the
NWA1121-NI (see Section 5.5 on page 51).
•Use the Channel Usage screen to view whether a channel is used by another wireless network
or not. If a channel is being used, you should select a channel removed from it by five channels
to completely avoid overlap (see Section 5.6 on page 52).
5.3 View Logs
Use the Logs screen to see the logged messages for the NWA1121-NI.
Log entries in red indicate system error logs. The log wraps around and deletes the old entries after
it fills.
To Next Page
Loading...
