Chapter 4 Tutorial
NWA1121-NI User’s Guide
39
to allow wireless traffic between B and wireless clients connected to A (W, Y and Z). Other wireless
devices (X) must not be able to connect to the FTP server.
Figure 11 FTP Server Connected to a Wireless Client
4.3.2 Configuring the NWA1121-NI in MBSSID or Root AP Mode
Before setting up the NWA1121-NI as a wireless client (B), you need to make sure there is an
access point to connect to. Use the Ethernet port on NWA1121-NI (A) to configure it via a wired
connection.
To Next Page
Loading...
