Chapter 6 Wireless LAN
NWA1121-NI User’s Guide
67
6.4.3 Wireless Client Mode
Use this screen to turn your NWA1121-NI into a wireless client. Select Client as the Operation
Mode. The following screen displays.
Figure 22 Wireless LAN > Wireless Settings: Wireless Client
The following table describes the general wireless LAN labels in this screen.
Table 12 Wireless LAN > Wireless Settings: Wireless Client
LABEL DESCRIPTION
Basic Settings
Wireless LAN
Interface
Select the check box to turn on the wireless LAN on the NWA1121-NI.
Operation Mode Select Client in this field.
Site Survey Click this to view a list of available wireless access points within the range. Select the AP
you want to use.
Note: After selecting Client as the Operation Mode in the Basic Settings section, you must
click Apply to be able to select from the AP list.
To Next Page
Loading...
